Contact

Language

The project

Work with us

Go deeper

Reading comfort

Text size

Language

From mineral resource to industrial value

Labs · Careers pathfinder

Which steel career suits me, and which training should I follow in Cameroon?

Answer four questions: the tool ranks thirteen steelworks trades by your interests, your level and the work setting you prefer, and shows the training that leads to them in Cameroon. No vacancies are open today.

Inputs

What you enjoy doing
Your level of training, achieved or planned
Where you like to work
Working hours

Result

Illustrative

Your best match: Maintenance mechanic (100%). Here are the steel trades closest to your answers, with the training that leads to them in Cameroon. No vacancies are open today: this tool is for orientation.

  1. Mechanical maintenance · Workshop

    Maintenance mechanic

    Match100%

    Diagnose and repair gearboxes, pumps, hydraulics and cranes; prepare planned shutdowns so the line does not break down.

      Skills and training
      Key skills
      Fault diagnosis · Preventive maintenance · Welding and machining
      Example roles
      Maintenance fitter · Hydraulics technician · Welder and boilermaker
      Training in Cameroon
      Vocational certificate or technical baccalaureate in maintenance; BTS or DUT in industrial maintenance (for example IUT Douala); welding qualifications. Entry is also possible through an approved vocational training centre (vocational certificate), then an apprenticeship.

    • Mechanical maintenance · Workshop

      Welder and fabricator

      Match86%

      Repair and fabricate in the workshop or on the line: chutes, guards, steelwork, hard-facing of wear parts. A skilled trade in demand across industry.

        Skills and training
        Key skills
        Fault diagnosis · Preventive maintenance · Welding and machining
        Example roles
        Maintenance fitter · Hydraulics technician · Welder and boilermaker
        Training in Cameroon
        Vocational certificate or technical baccalaureate in maintenance; BTS or DUT in industrial maintenance (for example IUT Douala); welding qualifications. Entry is also possible through an approved vocational training centre (vocational certificate), then an apprenticeship.

      • Hot rolling · ≈ 1,100 °C

        Rolling-mill technician

        Match74%

        Set the mill stands and guides, check the dimensions of rebar and wire rod, change rolls and react fast on a high-speed line.

          Skills and training
          Key skills
          Precision setting · Dimensional inspection · Reading drawings
          Example roles
          Roller and stand setter · Reheating-furnace operator · Bundling operator
          Training in Cameroon
          Vocational certificate or baccalaureate, BTS or DUT in mechanical and production engineering (for example IUT Douala), then mentoring on the line.

        • Electrical maintenance · Substation

          High-voltage electrician

          Match71%

          Operate and maintain the high-voltage substation, the furnace transformers and the mill drives; lock out installations before any work.

            Skills and training
            Key skills
            Electrical authorisations · Reading schematics · Testing and measurement
            Example roles
            Maintenance electrician · High-voltage technician · Instrumentation technician
            Training in Cameroon
            Technical baccalaureate in electrical engineering; BTS or DUT in electrical engineering (for example IUT Douala); electrical engineers (for example ENSP Yaoundé). Electrical safety authorisations are issued after training with an accredited body.

          • Health, safety and environment · On the ground

            Health, safety and environment (HSE) officer

            Match57%

            Prevent accidents and pollution: risk assessments, work permits, team training, monitoring of emissions, water and waste, emergency preparedness.

              Skills and training
              Key skills
              Risk assessment · Incident investigation · Environmental monitoring
              Example roles
              Safety officer · Environmental technician · Occupational health nurse
              Training in Cameroon
              BTS, bachelor’s or master’s in quality, safety and environment (for example EGEM Meïganga, University of Ngaoundéré); first aid and fire-fighting.
            No open vacanciesThe project is in development: recruitment will follow construction and will be announced on the Careers page. You can already let us know about your profile there. Careers page →

            Assumptions and data

            ParameterValue usedStatusSource
            Main interestUp to 30 points (fit 1 to 3, × 10)RuleCameroon Steel Labs ranking grid (an orientation tool, not an aptitude test)
            Work setting20 points if it is the main setting, 12 if frequentRuleCameroon Steel Labs ranking grid (an orientation tool, not an aptitude test)
            Level of training20 points (usual entry), 10 (above), 8 (one level below)RuleCameroon Steel Labs ranking grid (an orientation tool, not an aptitude test)
            Preference for day work−10 points (shift work), −4 (on-call duty)RuleCameroon Steel Labs ranking grid (an orientation tool, not an aptitude test)
            Trade families, skills, training10 families, 13 trades, taken from the Careers pageSourcedCameroon Steel desk review of published programme lists (ENSP Yaoundé; Université de Ngaoundéré: EGEM, EGCIM), October 2026
            Institutions namedENSP Yaoundé, IUT Douala, University of Ngaoundéré (EGEM, EGCIM), University of EbolowaSourcedCameroon Steel desk review of published programme lists (ENSP Yaoundé; Université de Ngaoundéré: EGEM, EGCIM), October 2026
            Open vacanciesNone (October 2026)SourcedCameroon Steel, Careers page, edition of 10 October 2026

            How this is calculated

            Ranking. Each trade scores points: up to 30 for your main interest (fit from 1 to 3, × 10), 20 if your preferred work setting is its main setting (12 if frequent), 20 if your level matches the usual entry (10 above, 8 one level below). If you prefer day work, a shift-work trade loses 10 points (4 if it involves on-call duty). The percentage is the score out of 70. Ties keep a fixed order: the same answers always give the same list.

            Training. The routes shown are those of the Careers page and name only institutions whose programmes have been checked. Cameroon does not yet offer a dedicated ferrous-metallurgy programme, so on-the-job training will be essential. Naming an institution implies no partnership.

            Limits. An orientation tool, neither an aptitude test nor a job offer.

            Sources

            1. ENSP Yaoundé (École nationale supérieure polytechnique de Yaoundé), departments
            2. IUT de Douala / ISTD, departments
            3. Université de Ngaoundéré, EGEM and EGCIM
            4. Université de Douala (ENSET, ENSPD, IUT)
            5. Cameroon Steel desk review of published programme lists (ENSP Yaoundé; Université de Ngaoundéré: EGEM, EGCIM), October 2026

            Go further